Products

What's New

Like HTA on Facebook!


  Home > Shop >

High Tower Armory 90/22™ (Desert Tan)



 
Alternative Views:


The next generation of Ruger 10/22 bullpup stocks…
Price: $269.99

Stock Status:In Stock
Availability: Usually Ships in 24 Hours
Product Code: HTA9022TAN
Qty:



The following items are included FREE with this product:

Description Technical Specs
 
From tactical training to plinking, varmint hunting to home defense, the HTA 90/22™ from High Tower Armory™ is the perfect stock system for your shooting needs. The High Tower Armory 90/22 is a compact, maneuverable stock kit for the Ruger® 10/22® which utilizes a bullpup design for superior balance and ergonomics. This incredibly durable, military grade polymer stock will reduce the overall length of most 10/22’s to about 26 1/2 inches, just over the federally required minimum length for rifles. The HTA 90/22 also features a CNC machined monolithic aluminum Picatinny optics rail and aluminum bedding block, as well as an ambidextrous steel charging handle which cycles the factory 10/22 bolt from forward positions. The HTA 90/22 trigger linkage is made of Melonite treated steel for the most consistent and efficient transfer of energy, having a resistance to flex three times greater than aluminum by weight. A safety extension is included to allow the original factory safety to be activated, in addition to a safety selector located near the trigger. Also included is both an extended magazine and automatic bolt release which replace the factory releases and allow for much faster manipulation of your rifle's controls. Additionally, a shell deflector can be attached to the stock making it safe and comfortable to shoot left handed. This kit comes complete with a removable dummy suppressor, two side mounted Picatinny rails, and a detachable ammunition storage box for holding spare rounds in the field. Accepts factory 10 round magazines as well as most aftermarket high capacity magazines. Fits factory 18 1/2" and .920" bull barrels at least 18 inches in length (17 1/4 inches from receiver face to muzzle). Made in the USA. *Ruger 10/22 not included.

IMPORTANT: PLEASE CHECK THAT YOUR RUGER 10/22 BARREL IS AT LEAST 18” IN LENGTH. MOST 10/22 barrels are long enough to produce a legal length rifle in the 90/22 stock system. However, some 10/22 variants and aftermarket barrels are shorter than 18". Federal law requires rifles to have a minimum overall length of 26”. The HTA 90/22 requires a minimum barrel length of 18" to achieve the 26" overall length. You can check your barrel length by removing the barrel from the 10/22 receiver and measuring it from muzzle to breech. See the FAQ page for more information.
Features
  • Compact bullpup design
  • Aluminum Picatinny optics rail
  • Aluminum bedding block
  • Detachable ammunition storage box
  • Shell deflector included for ambidextrous use
  • Detachable dummy suppressor
  • Military grade polymer body construction
  • Melonited steel ambidextrous charging handle
  • Melonited steel trigger linkage
  • Melonited steel extended automatic bolt release
  • Two staged extended magazine release
  • Two side mounted Picatinny rails for accessories
  • Fits standard and bull barrels at least 18" in length
  • Made in the USA

Accessories
HTA Threaded Mid-Weight 10/22 Barrel HTA 10/22 Magazine Coupler Crusader Gear HTA 90/22 Sling HTA 10/22 Bull Barrels
Sale Price: $159.99

Add
Sale Price: $8.99

Add
Price: $34.99

Add
Price: $184.99

Add
HTA Integrally Flash Suppressed 10/22 Barrel HTA 90/22 Tactical Charging Handle Grip HTA 90/22 Aluminum Side Rail with QD Sling Pocket HTA 90/22 TacPack Pro
Sale Price: $179.99

Add
Price: $16.99

Add
Price: $16.99

Add
Sale Price: $59.99

Add
HTA 90/22 Aluminum Barrel Shroud For Factory 10/22 Barrels
Price: $44.99

Add

Average Rating: 5 of 5 Total Reviews: 15 Write a review »

  0 of 0 people found the following review helpful:
 
Best 22 Plinker Ever! May 13, 2014
Reviewer: Mike from Wilmington, NC United States  
Just got back from range. Had so much fun didn't
want to leave, but run out on ammo. Will say that
the only thing that would make this gun better is
if it was legal to make automatic. Great kit HTA!
Any one reading this you must get one.
Thanks,
Mike

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Raising the bar in every way... April 16, 2014
Reviewer: Charles T. from California  
I want to thank you for your absolutely unparalleled customer service and for an amazing product.

The stock I ordered (desert tan) arrived damaged, which almost certainly occurred during the shipping process.I received the new stock a couple days after my call, as promised, and in perfect condition. Not only that, but to address the problem I had mentioned on the phone, someone had taken the time to ensure the same issue did not occur again. Never, ever, in my entire life as a consumer, have I experienced an individual and company go to such extraordinary lengths to satisfy a customer. It is patently obvious that Andy and the HTA team hold themselves, their products, and their commitment to their customers to a standard that is far above what most of us expect from other companies these days. The product itself is outstanding, as everyone who has purchased one seems to agree. The materials, craftsmanship, instructions, fit, and finish are of the highest quality, and I can personally attest to what an absolute head-turner the 90/22 is at the range. It's an extremely fun rifle to shoot, and I look forward to enjoying it for years to come. Thank you, HTA, for raising the bar in every way. You've not only gained a loyal customer, but an advocate who is only too happy to spread the word about what a great company HTA is. I wish everyone at HTA the utmost success, and look forward to purchasing additional products down the road.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
90/22 is great October 28, 2013
Reviewer: Jason W from ELKTON, MD United States  
I ordered my 90/22 early in october and there was a mix up with the shipping address.  USPS took two weeks to finally return to sender.  I was shocked when HTA sent it back to me overnight.  I am not even sure if the mix up was their fault or mine.  I was very impressed.  The product is very solid, went together very easily and fires like a dream.  Great Product from a great company.  Thanks again.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
MADE IN USA! October 10, 2013
Reviewer: Joseph L. from Spring Hill, FL  
Dear Sirs,

Just finished building a HTA90/22 last night. I have to commend you for a very QUALITY PRODUCT!

I have, in the past, built an SG WORKS SKS , A SEIGA 12 KUSHNAPUP and several others. Your HTA 90/22 was the best quality,best workmanship I have seen so far.

I hope you might consider other stock kits in the future.

THANK YOU FOR A VERY QUALITY PRODUCT….MADE IN USA!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Why can't all companies be like this?!?! October 9, 2013
Reviewer: chuck chin from romeoville, IL United States  
First off, if you get to speak with Andy you will understand what the model of customer service looks like! While your waiting your short 48 hours to get your hands on this beauty, watch rook voice on you tube and by the time it gets to your house after you wipe off the drool, you'll have  it together in 15 mins ( if you have any mechanical aptitude ) seriously 45 min max if you slowly read every direction. It's that great of a product!  I had every manager of my local gun store checking it out when I took it over, they even took it to the owner to talk about what a great value for the build it is. Just a great over all experience!! Thanks HTA!

Was this review helpful to you?

View All Customer Reviews