HTA 10/22 Anti-rotation Ejector

0 Review(s) Write a Review

On sale: ~~$5.99~~ $4.99

This drop-in ejector for the Ruger 10/22 won't rotate out of place when the trigger assembly is separated from the receiver.

Part Number: HTA1022ARE

Availability: In Stock.

Quantity

Description

If you've cleaned and reassembled your 10/22's as often as we have, you may well have encountered the issue that inspired us to develop this product. Because the 10/22's factory ejector is held in place by only one pin, it will almost certainly rotate out of place when the trigger assembly is removed from the receiver. Unfortunately, the 10/22 can then be reassembled with the ejector pointing backwards. As has been the case once or twice for us, this error may go undetected until shortly after the last bolt has been installed on a certain 10/22 bullpup stock...

The floppy 10/22 ejector is now a thing of the past. Our hardened steel, nitride treated, replacement ejector features an arm that engages the existing bolt lock spring inside the trigger housing to keep the ejector secured in the correct orientation. Installation requires no modifications: simply remove the old ejector, pass the straight end of the bolt lock spring through the hole in the Anti-rotation Ejector, and reinstall the ejector cross pin. Although it may seem trivial to some, this drop-in upgrade installs in seconds but can prevent a minor inconvenience from becoming a genuine headache. Designed, manufactured, and finished right here in the USA.

WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and reproductive harm. For more information, go to https://www.P65Warnings.ca.gov

HTA 10/22 Bolt Buffer

$3.99

Out of Stock.

(1)

HTA RM-25 Windowed 10/22 Magazine

~~$29.99 Original price~~ $27.99 Sale

Usually Ships in 24 Hours

(9)

Select Options

M-LOK Grip Plugs

~~$5.99 Original price~~ $3.99 Sale

In Stock.

(2)

Select Options

HTA 10/22 Anti-rotation Ejector

Related Items