High Tower Armory 90/22 (OD Green)

Price: $269.99

HTA 90/22 Bullpup Ruger 10/22 Conversion (OD Green)

Part Number: HTA9022ODG

Availability: Usually Ships in 24 Hours

Quantity

Description
Customer Reviews

From tactical training to plinking, varmint hunting to home defense, the HTA 90/22 from High Tower Armory is the perfect stock system for your shooting needs. The High Tower Armory 90/22 is a compact, maneuverable stock kit for the Ruger 10/22 which utilizes a fully ambidextrous bullpup design for superior balance and ergonomics. This incredibly durable, military grade polymer stock will reduce the overall length of most 10/22s to about 26 1/2 inches, just over the federally required minimum length for rifles. The HTA 90/22 also features a CNC machined monolithic aluminum Picatinny optics rail and aluminum bedding block, as well as an ambidextrous steel charging handle which cycles the factory 10/22 bolt from forward positions. The HTA 90/22 trigger linkage is made of Melonite treated steel for the most consistent and efficient transfer of energy, having a resistance to flex three times greater than aluminum by weight. A safety extension is included to allow the original factory safety to be activated, in addition to a safety selector located near the trigger. Also included is both an extended magazine release and automatic bolt release which replace the factory releases and allow for much faster manipulation of your rifle's controls. Additionally, a shell deflector can be attached to the stock making it safe and comfortable to shoot left handed. This kit comes complete with a removable dummy suppressor, two side mounted Picatinny rails, and a detachable ammunition storage box for holding spare rounds in the field. Accepts factory 10 round magazines as well as most aftermarket high capacity magazines. Fits factory 18 1/2" and .920" bull barrels at least 18 inches in length (17 1/4 inches from receiver face to muzzle). Made in the USA. *Ruger 10/22 not included.

IMPORTANT:PLEASE CHECK THAT YOUR RUGER 10/22 BARREL IS AT LEAST 18 IN LENGTH. MOST 10/22 barrels are long enough to produce a legal length rifle in the 90/22 stock system. However, some 10/22 variants and aftermarket barrels are shorter than 18". Federal law requires rifles to have a minimum overall length of 26". The HTA 90/22 requires a minimum barrel length of 18" to achieve the 26" overall length. You can check your barrel length by removing the barrel from the 10/22 receiver and measuring it from muzzle to breech.

Some states or local jurisdictions may have further regulations governing this product when assembled on a 10/22 (NY, CT, etc). This stock will add what is considered a "pistol grip" by some states, as well as shorten the overall length below some states' minimum requirement which may be longer than 26". By purchasing this item, the buyer is acknowledging they understand their state and local laws and intend to comply with any further infringements.

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

5.0

View All Reviews - Reset

Very impressed, had to get another!

My collection consists mostly of SAA revolvers and lever action rifles. I like the old school wood and steel. I initially purchased the OD Green stock to build a cool little 10/22 to give to my nephew for his first rifle. After putting it together, I must say, I was very impressed. It has a very solid feel (not like most of the plastic toy feeling conversion stocks), and fully functional ambidextrous charging rails really make the feel top notch. After taking it to the range to sight in the extra toys (red dot, laser), I was in love. I knew there was no way I was going to give it up. Lucky for my nephew I was able to order another stock, Now I have a desert tan on one the way. Along with a bull barrel and a few Volquartsen parts, I can't wait to turn my 10/22 into a bad a** little shooter. P.S. if you show your it friends, don't let it out of your sight. You may not get it back (its really popular)!

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: (Verified Buyer) Jason from Anchorage, AK United States on 6/27/2013

Worth the wait!

After following a thread over at bullpup forum where I discovered hta, I waited just over a year to get my order info. I placed it on Friday afternoon and had my stock by Monday morning. Andy and the rest of the crew at hta were awesome through out the manufacturing process and went above and beyond to answer any question anyone had via email or on bullpupforum.com. Enough about them though, the reason we're here is because of the hta 90/22. It just flat out rocks. Took me less than an hour from start to finish and that was taking my time with it. Fit and finish is awesome. It doesn't feel like some of the other cheap stocks used to throw your 22 in. You can tell they put forth the extra effort to ensure a high quality product.

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: (Verified Buyer) James from Pataskala, OH United States on 6/5/2013

Nice bull pup but some sacrifices have to be made

This is a well thought out kit that uses high grade components. That being said..once you wrap your 10/22 in this you can't clean the action without complete disassembly..which is about 14 screws and nuts,and they are all different lengths.Not very convenient,especially when the teeny tiny nuts fall out. Needs to be addressed. Also..the trigger pull is gritty if you leave the protective black plastic condom on the kits extension tang. Take it off and the trigger pull is smoother..but still vague, although the reset isn't too bad. The ammo storage thingy is pretty much useless in my opinion..I left it off and can grab the rifle nicely where the storage container use to be. They should just eliminate the container and put a grab handle there. All in all, I like the product,but keep upgrading it,please.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: (Verified Buyer) Breakaway500 from MA United States on 1/17/2016

OD HTA 90/22 = Amazing

I purchased this stock March 2014. Everything about this stock is well-thought out, solidly built, and quality throughout. Fit and finish is excellent. I currently have a Bushnell TRS-25 red dot on it and it feels great to shoot, and is also quite the head turner at the range. If you want a bullpup kit for your 10/22, look no further! Note: HTA is an amazing company. They ship fast, are very active on the forums, and were very responsive to my many emails (with loads of questions). If anybody deserves your business, it's HTA!

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: (Verified Buyer) Kylan from Hawaii on 8/4/2015

Impressed

I received the OD Green 90/22 as a gift from my bro for Xmas (pre built). I hadn't seen one in person but had seen them online before. The quality was far above what I expected. It's a solid piece with no rattle to any of the internal components. It's comfortable and is pretty close to the real feel of a PS90 in your hand, both size and weight wise. I threw a c-more tactical railway red dot on it and took it to the range today (1/1/15), and again was impressed. The trigger is a lot crisper than I thought it would be with less pre travel than I thought it would have. The reset is fairly short as well which surprised me. After zeroing it in a few inches low at 10yds, I moved out to 25yds. After a little more fine tuning It held great groups and was a blast to shoot. Anyone looking for a fun, accurate, well built range toy should definitely consider this kit.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: (Verified Buyer) Jeff from PA on 1/1/2015

High Tower Armory 90/22 (Arctic Gray)

$269.99

Usually Ships in 24 Hours

(5)

Add To Cart

High Tower Armory 90/22 (Black)

$269.99

Usually Ships in 24 Hours

(65)

Add To Cart

High Tower Armory 90/22 (Flat Dark Earth)

$269.99

Usually Ships in 24 Hours

(11)

Add To Cart

High Tower Armory 90/22 (Desert Tan)

$269.99

Usually Ships in 24 Hours

(16)

Add To Cart

HTA 10/22 Bull Barrels

$184.99

Out of Stock.

(0)

Select Options

HTA Fluted Mid-Weight 10/22 Barrel

$179.99

Out of Stock.

(2)

Add To Cart

HTA 10/22 Bolt Buffer

$3.99

Usually Ships in 24 Hours

(1)

Select Options

HTA Integrally Flash Suppressed 10/22 Barrel

$199.99

Out of Stock.

(2)

Select Options

HTA 10/22 Magazine Coupler

~~$10.99 Original price~~ $9.99 Sale

In Stock.

(8)

Add To Cart

HTA RM-25 Windowed 10/22 Magazine

~~$29.99 Original price~~ $25.99 Sale

Usually Ships in 24 Hours

(7)

Select Options

HTA 90/22 Aluminum Side Rail with QD Sling Pocket

$16.99

Usually Ships in 24 Hours

(0)

Select Options

HTA 90/22 Tactical Charging Handle Grip

$16.99

Usually Ships in 24 Hours

(3)

Select Options

HTA 90/22 TacPack Pro

$63.99

In Stock.

(4)

Add To Cart

HTA 90/22 Aluminum Barrel Shroud For Factory 10/22 Barrels

$54.99

In Stock.

(8)

Add To Cart

High Tower Armory 90/22 (OD Green)

Average Customer Ratings

Related Items

Accessories