What's New

Like HTA on Facebook!

  Home > Shop >

High Tower Armory 90/22™ (OD Green)
High Tower Armory 90/22â„¢ (OD Green)

Alternative Views:

The next generation of Ruger 10/22 bullpup stocks…
Price: $269.99

Stock Status:In Stock
Availability: Usually Ships in 24 Hours
Product Code: HTA9022ODG

The following items are included FREE with this product:

Description Technical Specs
From tactical training to plinking, varmint hunting to home defense, the HTA 90/22™ from High Tower Armory™ is the perfect stock system for your shooting needs. The High Tower Armory 90/22 is a compact, maneuverable stock kit for the Ruger® 10/22® which utilizes a bullpup design for superior balance and ergonomics. This incredibly durable, military grade polymer stock will reduce the overall length of most 10/22’s to about 26 1/2 inches, just over the federally required minimum length for rifles. The HTA 90/22 also features a CNC machined monolithic aluminum Picatinny optics rail and aluminum bedding block, as well as an ambidextrous steel charging handle which cycles the factory 10/22 bolt from forward positions. The HTA 90/22 trigger linkage is made of Melonite treated steel for the most consistent and efficient transfer of energy, having a resistance to flex three times greater than aluminum by weight. A safety extension is included to allow the original factory safety to be activated, in addition to a safety selector located near the trigger. Also included is both an extended magazine and automatic bolt release which replace the factory releases and allow for much faster manipulation of your rifle's controls. Additionally, a shell deflector can be attached to the stock making it safe and comfortable to shoot left handed. This kit comes complete with a removable dummy suppressor, two side mounted Picatinny rails, and a detachable ammunition storage box for holding spare rounds in the field. Accepts factory 10 round magazines as well as most aftermarket high capacity magazines. Fits factory 18 1/2" and .920" bull barrels at least 18 inches in length (17 1/4 inches from receiver face to muzzle). Made in the USA. *Ruger 10/22 not included.

IMPORTANT: PLEASE CHECK THAT YOUR RUGER 10/22 BARREL IS AT LEAST 18” IN LENGTH. MOST 10/22 barrels are long enough to produce a legal length rifle in the 90/22 stock system. However, some 10/22 variants and aftermarket barrels are shorter than 18". Federal law requires rifles to have a minimum overall length of 26”. The HTA 90/22 requires a minimum barrel length of 18" to achieve the 26" overall length. You can check your barrel length by removing the barrel from the 10/22 receiver and measuring it from muzzle to breech. See the FAQ page for more information.
  • Compact bullpup design
  • Aluminum Picatinny optics rail
  • Aluminum bedding block
  • Detachable ammunition storage box
  • Shell deflector included for ambidextrous use
  • Detachable dummy suppressor
  • Military grade polymer body construction
  • Melonited steel ambidextrous charging handle
  • Melonited steel trigger linkage
  • Melonited steel extended automatic bolt release
  • Two staged extended magazine release
  • Two side mounted Picatinny rails for accessories
  • Fits standard and bull barrels at least 18" in length
  • Made in the USA

Crusader Gear HTA 90/22 Sling HTA Fluted Mid-Weight 10/22 Barrel HTA 10/22 Magazine Coupler HTA 10/22 Bull Barrels
Price: $34.99

Price: $179.99

Sale Price: $9.99

Price: $184.99

Crusader Gear HTA 90/22 Sling HTA Fluted Mid-Weight 10/22 Barrel HTA 10/22 Magazine Coupler HTA 10/22 Bull Barrels
HTA 90/22 Aluminum Side Rail with QD Sling Pocket HTA 90/22 Tactical Charging Handle Grip HTA 90/22 Aluminum Barrel Shroud For Factory 10/22 Barrels HTA Integrally Flash Suppressed 10/22 Barrel
Price: $16.99

Price: $16.99

Price: $44.99

Price: $199.99

HTA 90/22 Aluminum Side Rail with QD Sling Pocket HTA 90/22 Tactical Charging Handle Grip HTA 90/22 Aluminum Barrel Shroud For Factory 10/22 Barrels HTA Integrally Flash Suppressed 10/22 Barrel
HTA 90/22 TacPack Pro
Sale Price: $63.99

HTA 90/22 TacPack Pro

Average Rating: 5 of 5 Total Reviews: 20 Write a review »

  1 of 2 people found the following review helpful:
Nice bull pup but some sacrifices have to be made January 17, 2016
Reviewer: Breakaway500 from MA United States  
This is a well thought out kit that uses high grade components. That being said..once you wrap your 10/22 in this you can't clean the action without complete disassembly..which is about 14 screws and nuts,and they are all different lengths.Not very convenient,especially when the teeny tiny nuts fall out. Needs to be addressed. Also..the trigger pull is gritty if you leave the protective black plastic "condom" on the kits extension tang. Take it off and the trigger pull is smoother..but still vague, although the reset isn't too bad. The ammo storage thingy is pretty much useless in my opinion..I left it off and can grab the rifle nicely where the storage container use to be. They should just eliminate the container and put a grab handle there. All in all, I like the product,but keep upgrading it,please.

Was this review helpful to you?

  3 of 3 people found the following review helpful:
OD HTA 90/22 = Amazing August 4, 2015
Reviewer: Kylan from Hawaii  
I purchased this stock March 2014.  Everything about this stock is well-thought out, solidly built, and quality throughout.  Fit and finish is excellent.  

I currently have a Bushnell TRS-25 red dot on it and it feels great to shoot, and is also quite the head turner at the range.  

If you want a bullpup kit for your 10/22, look no further!

Note: HTA is an amazing company.  They ship fast, are very active on the forums, and were very responsive to my many emails (with loads of questions).  If anybody deserves your business, it's HTA!

Was this review helpful to you?

  2 of 2 people found the following review helpful:
Impressed January 1, 2015
Reviewer: Jeff from PA  
I received the OD Green 90/22 as a gift from my bro for Xmas (pre built). I hadn't seen one in person but had seen them online before. The quality was far above what I expected. It's a solid piece with no rattle to any of the internal components. It's comfortable and is pretty close to the real feel of a PS90 in your hand, both size and weight wise.

I threw a c-more tactical railway red dot on it and took it to the range today (1/1/15), and again was impressed. The trigger is a lot crisper than I thought it would be with less pre travel than I thought it would have. The reset is fairly short as well which surprised me. After zeroing it in a few inches low at 10yds, I moved out to 25yds. After a little more fine tuning It held great groups and was a blast to shoot.

Anyone looking for a fun, accurate, well built range toy should definitely consider this kit.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Outstanding Value! November 19, 2013
Reviewer: Joe from Spring, TX United States  
Very happy. Great build quality. Taking my time I spent probably 45 minutes total. The next one will probably only take 10 minutes.

The quality of the parts is very good. The OD Green finish looks and feels great. The glossy instruction manual was useful.
The online videos were a huge help.

This was my first purchase from HTA and I was very pleased with the prompt shipping and good packing.

Highly recommended.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
OUTSTANDING PRODUCT!!!!! October 10, 2013
Reviewer: Bob from Alabama  
I had been on the waiting list to get one of these for about two months when I decided to call and find out what the time frame might be for getting me a stock.  Well, customer service was EXCELLENT!!!!!  I had my stock two days later!!!  You guys rock!!!
Now for the product review: INCREDIBLE!  This is THE best upgrade out there for 10/22's period.  Nothing else out there compares to the professional fit and finish of this kit - did I mention it's made in the USA?  The instructions were easy to follow - lots of pictures made it really easy for someone like me who has a third grade IQ.  ;-).   This thing is SOLID - no rattling noises whatsoever.    I highly recommend this kit to anybody looking for something different to do with their 10/22 - pure FUN!

Keep up the GREAT work - especially your customer service!  I will shop again . . . I still need a tan, black, and dipped stock to make the collection complete!

Thanks again!!!!!

Was this review helpful to you?

View All Customer Reviews